iPhone 6 Plus Bluetooth can't connect,Rear Camera doesn't work, replace WiFi module and Rear Camera, and the machine will return to normal.
Previously repaired iPhone6 Plus Backlight/Screen Half Black, turn it off automatically after a while, and find a fault after detection,Jump wire is done.
The iPhone 6 Plus mobile phone number has no service, and the problem is faulty, and it is caused by the U1V1 disconnection, and the problem is repaired after the flying line.
iPhone 6 Plus Right Screw Column Breaking Connectation Can't open the phone, because this screw hole is a 12C bus, so the fault repair after the re-flying line is scraped.
Previously repaired iPhone 6 Plus mobile phone no display did not respond, found reset_1V8_L and chestnut_TO_PMU_Acdin7 two pin no value,Jump wire finished.
iPhone 6 Plus charges at night, the second day, the phone does not boot, it is caused by diode damage, after replacement problem repair
iPhone 6 Plus screen failure, replace the display, touch VCC chip and return to normal.
The iPhone6 Plus phone has no hands-free, detects that the CPU problem is found, and the UF is turned on, and the ringtone is normal.
iPhone 6 Plus mobile phone expansion operation is improper. the mainboards PCB circuit defect,Update System did not show progress bars, but reported error code 4014.PCB layer Jump wire was dug and successfully repaired.
