iPhone 6 Plus phone has no signal, * # 06 # no serial number, detected is caused by the U_MBPAD intensive pad drop-off point, and the fill point is loaded.
The iPhone 6 Plus black screen can't open, and it is detected that the three VDD10_MIPIC Point short circuits on the CPU are caused, directly on the green oil, and the fault is perfect.
iPhone 6 Plus Front Camera does not work and the distance sensing cannot be used. It is found that it is caused by the small component Inveracious Soldering, and the problem is repaired after short-circuit.
The iPhone 6 Plus boot white apples restarted, and the detection is found to be caused by the logical chip and the CPU connected to the bus disconnection, and the CPU is repaired after the flying line.
iPhone 6 Plus has no sound and can not be charged. After detection, it was found that it was caused by component Short bridge, and the problem was repaired after processing.
iPhone 6 Plus cannot boot, and the detection is found to be caused by the screw column and the chip disconnection, and the problem is repaired after the flying line.
iPhone 6 Plus touch failure, after detection, was originally caused by BCM5976C1-5.7V disconnection, and the problem was fixed after Jump wire.
iPhone 6 Plus baseband dropping points caused to have no service repair, which was originally caused by Baseband dropping pad break off, and the fault was repaired after the repair.
iPhone 6 Plus Low current can't be turned on. After detection, it is found that the CPU RAM is deformed Inveracious Soldering, so it is replaced and soldered again, and the fault is repaired.
