iPhone XR suddenly used no display, and the mobile phone turned on no booting. After detection, Capacitor was found to be broken, and the fault was repaired after replacement.
Peer repair machine iPhone X mobile phone can't be charged, measure charging management U3300 diode value, find A4 disconnected,Jump wire OK, spike.
iPhone 6s mobile phone Hang Logo(white apple)was started and restarted. After testing, it was found that U5411 chip was damaged, and the fault was repaired after replacement.
iPhone 6 Plus Low current can't be turned on. After detection, it is found that the CPU RAM is deformed Inveracious Soldering, so it is replaced and soldered again, and the fault is repaired.
iPhone 6 Plus Bluetooth can't connect,Rear Camera doesn't work, replace WiFi module and Rear Camera, and the machine will return to normal.
iPhone 6s Plus mobile phone has no signal. After detection, it was found that IF VCC was disconnected, and the problem was fixed after Jump wire.
Previously repaired iPhone6 Plus Backlight/Screen Half Black, turn it off automatically after a while, and find a fault after detection,Jump wire is done.
iPhone 7 Nand Nand caused the mobile phone to fail to start, DFU mode,Open was replaced successfully and Keep data was repaired.
no serviecs appears in iPhone 8 Plus mobile phone, so it can't make a phone call to the Internet. The detection shows that the card Xt6601 is caused by the damage of U_WTR_E RF IC chip.
